EDM Oils

Product Details:

Spark Erosion Oils

Description:

• Spark Erosion is one of the most modern methods used for manufacture of complex recessed parts viz, molds or dies
• Sparks are generated between an electrode and the job, which is submerged in an insulating medium spark erosion oil. Spark erosion oil should have proper DI-electric value, and also not crest a fire hazard

Salient Features:

• IPOL Spark Erosion Oils are highly refined mineral oils of narrow boiling range manufactured to meet the DI-electric strength requirements of the end use

Application:

• It is used as an insulating medium to ensure the eroded material is completed removed from the job, by controlling the rate of cooling correctly

Benefits:

• Have good DI-electric strength
• Non-corrosive and prolong the life of the electrode
• Have low surface tension and density
• Are safer to use as these have high flash points
• Require least make up, during use
• Splotch

Additional Information:

• Delivery Time: READY CTOCK

Spark SEO Series EDM Oils

Description:

• Spark Erosion is one of the most modern methods used for manufacture of complex recessed parts viz, molds or dies
• Controlled removal of metal is achieved by generating sparks between an electrode and the job and which is submerged in an insulating medium
• The correct insulating medium has to ensure that the eroded material is completely removed from the job as well as control the rate of cooling of the electrode
• It should have proper di- electric value so as to permit controlled electrical discharge at the break- down voltage
• It should also not create a fire hazard. Kerosene which is sometimes used as the insulating medium may not meet dielectric strength requirements since it is not specifically manufactured to meet these and its use should therefore be avoided

IPOL Spark Erosion Oils are highly refined mineral oils of narrow boiling range manufactured to meet the DI-electric strength requirements of
end use.

IPOL Spark Erosion Oils offer the below mentioned Benefits:

• Have good DI-electric strength and are therefore safe to use
• Are non-corrosive and prolong the life of the electrode
• Have low surface tension and density allowing the err oded metal particles to be easily flushed out
• Are safer to use as these have high flash points
• Require least make up during use