Quenching Oils

IPOL Quenching 22 XFQ

Description:

• IPOL QUENCH 22 XFQ is general purpose medium fast quenching oil fortified with performance chemicals for consistent long lasting performance. It is mainly designed in view of job heat treaters where the inflow of jobs is with different material chemistry

Salient Features:

• Based on selected virgin base oil of excellent characteristics
• A high and uniform rate of cooling during initial quenching phase
• Faster speed ensures proper and uniform hardness
• Slower in the convection phase to avoid the distortion problems
• Fortified with antioxidant additive to ensure uniform and consistent performance of oil
• Lesser smoking and with reasonably high flash point reduces the risk of fire hazard
• Lower viscosity reduces the drag out losses

Precautions:

• Follow the practice of Preventive Maintenance of the Quench ants
• Avoid water/moisture contamination
• Use of compressed air for agitation should be strictly avoided as it increases the oxidation rate of the oil
• Heat exchanger should be in operation
• Avoid Cu and Copper alloys in heat exchanger. Cu acts as a catalyst for oxidation of the oil
• Maintain proper atmosphere in the furnace
• Maintain proper level of the oil

General Comments:

• Heat Treatment is a complex process of an art and science. We advise you to take our assistance for the proper system configuration if you are installing the new tank or else modifications if required for the old tank can be suggested by us
• The properties indicated are typical and may change slightly without affecting the performance of the product

Storage & Packaging:

• 22 XFQ can be supplied either in be preferably stored indoors in extreme temperatures. In case the precaution needs to be taken to water contamination. drums or bulk. The product should dry conditions and protected from drums are stored outside, adequate cover them for avoiding any rain

Safety & Precautions:

• 22 XFQ is unlikely to present any significant health hazard when proper personal and industrial hygiene are maintained
• Note: The information provided is not to be taken as a warranty or representation for which we assume no legal responsibility nor as permission or recommendation to practice any attended location or otherwise. It is solely offered for your consideration, investigation and verification

Additional Information:

• Item Code: XFQ

IPOL Enhanco Quench H – 301

Description:

• Enhanco Quench H - 301 is a high performance hot Quenching Oil of highly refined base oil fortified with performance chemicals for consistent long lasting performance. It is mainly designed in view of obtaining a desired distortion control and can be operated at a wide range of temperature. The reasonable good speed ensures proper hardness

Product Features:

• Based on selected refined virgin base oil having excellent antioxidant characteristics
• A high and uniform rate of cooling during initial quenching phase
• Faster speed ensures proper and uniform hardness
• Slower in the convection phase to avoid the distortion problems
• Fortified with antioxidant additive to ensure uniform and consistent performance of oil
• Lesser smoking and with high flash point reduces the risk of fire hazard
• Lower viscosity than the conventional hot oils
• Consistent bright finish of the components

Precautions:

• Use of Nitrogen Blanket would enhance the life for this hot oil
• Can be used in Seal Quench Furnace as well as Open Tank. However, life would be longer in SQF
• Follow the practice of Preventive Maintenance of the Quench ants
• Avoid water/moisture contamination
• Use of compressed air for agitation should be strictly avoided as it increases the oxidation rate of the oil
• Heat exchanger should be in operation
• Avoid Cu and Copper alloys in heat exchanger. Cu acts as a catalyst for oxidation of the oil
• Maintain proper atmosphere in the furnace
• Maintain proper level of the oil

Additional Information:

• Item Code: 301-H

IPOL Enhanco Quench H - 302

Description:

• IPOL Enhanco Quench H - 302 is a high viscosity hot Quenching Oil designed for the fine distortion control of the finished components. The product consists of highly refined base oil fortified with performance chemicals for consistent long lasting performance. It is recommended to use the oil at higher temperature for better dimensional control.

Product Features :

• Based on selected refined virgin base oil having excellent antioxidant characteristics
• A high and uniform rate of cooling during initial quenching phase
• Faster speed ensures proper and uniform hardness
• Slower in the convection phase to avoid the distortion problems
• Fortified with antioxidant additive to ensure uniform and consistent performance of oil
• Lesser smoking and with high flash point reduces the risk of fire hazard
• Lower viscosity than the conventional hot oils
• Consistent bright finish of the components

Additional Information:

• Item Code: 302-H

IPOL Enhanco Quench MF - 200

Product Brief:

IPOL Enhanco Quench MF – 200 is the high performance Quench oil fortified with performance chemicals for consistent long lasting performance. It is mainly designed in view of job heat treaters where the inflow of jobs is with different material chemistry. It is good for hardening low alloy materials.

Product Features:

• Based on selected virgin base oil of excellent characteristics
• A high and uniform rate of cooling during initial quenching phase
• Faster speed ensures proper and uniform hardness
• Slower in the convection phase to avoid the distortion problems
• Suitable for leaner alloys
• Fortified with antioxidant additive to ensure uniform and consistent performance of oil
• Lesser smoking and with reasonably high flash point reduces the risk of fire hazard
• Lower viscosity reduces the drag out losses
• Consistent bright finish of the components

Precautions:

• Follow the practice of Preventive Maintenance of the Quench ants
• Avoid water/moisture contamination
• Use of compressed air for agitation should be strictly avoided as it increases the oxidation rate of the oil
• Heat exchanger should be in operation
• Avoid Cu and Copper alloys in heat exchanger. Cu acts as a catalyst for oxidation of the oil
• Maintain proper atmosphere in the furnace
• Maintain proper level of the oil

Additional Information:

• Item Code: MF-200

IPOL Quenching Oils

• Heat treatment of ferrous materials helps improve their properties. This is achieved by heating these materials to their critical temperatures and suddenly cooling them by quenching in fluids e.g. water, oil etc. The use of water because of its higher thermal conductivity usually results in surface cracks and therefore mineral oils with their lower cooling rates are preferred. The use of mineral oil also prevents rusting of metal parts giving better dimensional accuracy

Product Details:

• Quenching Oils are marketed in various grades to cover a wide range of quenching requirements
• IPOL Quenching Oil 32 X is a general purpose Quenching Oil having low volatility and inherent oxidation stability
• IPOL QUENCHIG OIL 32 XC is accelerated Quenching Oil with special polar additives to give higher hardness during prolonged service
• IPOL Quenching Oil 32 XL is having low volatility and inherent thermal stability. It meets IS 2664/93 medium requirements and has offered a quenching time of 19.8 Secs. in one of the results reported by IIP Dunderhead
• IPOL Quenching Oil 100 XX is high viscosity Quenching Oil suitable for systems without cooling facilities
• IPOL Quenching Oil 150 XXX is a mar quench meeting IS: 4543-1980 (reaffirmed in 1987)
• IPOL Quenching Oil 320 XXX is high viscosity Quenching Oil with a high flash point suitable for quenching articles in a quenching tank without circulation system. This product can also be used for tempering purposes

IPOL QUENCHING OILS offer the below mentioned Benefits:

• They have low volatility and therefore requires less make-up
• The right viscosity is selected to give minimum distortion to the quenched material
• They have high thermal stability, which helps in increasing oil change periods

Additional Information:

• Item Code: 32-XL

POL Enhanco Quench H – 303

Product Brief:

• Enhanco Quench H - 303 is a high performance hot Quenching Oil of highly refined base oil fortified with performance chemicals for consistent long lasting performance. It is mainly designed in view of obtaining a desired distortion control and can be used as a cold oil as well as hot oil. The reasonable good speed ensures proper hardness

Product Features:

• Based on selected refined virgin base oil having excellent antioxidant characteristics
• A high and uniform rate of cooling during initial quenching phase
• Faster speed ensures proper and uniform hardness
• Slower in the convection phase to avoid the distortion problems
• Fortified with antioxidant additive to ensure uniform and consistent performance of oil
• Lesser smoking and with high flash point reduces the risk of fire hazard
• Lower viscosity than the conventional hot oils
• Consistent bright finish of the components
• Can be used as cold as well as hot oil

Additional Information:

• Item Code: H-303