Neat Cutting Oils

Product Details:

Description: IPOL SEO 450 is manufactured using high quality, low aromatic specially selected hydrocarbon base stocks. It is formulated with an ideal viscosity to provide the effective EDM operation with minimum electrode wear. They are virtually colorless & low aromatic content promotes low odor & low fume generation. IPOL SEO 450 is recommended to be used in electric –discharge machining, where high degree of precision & accuracy is required. Salient Features & Benefits:  Specially selected narrow boiling range product suitable for spark erosion.  Low viscosity offers excellent flushing & settling of metal fines.  Higher flash point – Better work safety.  Excellent oxidation stability – ensures longer fluid life.  Negligible aromatics improves safety & environment.  High dielectric strength improves precision & control sparking.  Long lasting transparency for clear operation  Acceptable odor – greater acceptance by machine operator.  Non-corrosive & prolong the life of the electrode. 

Product Details:

IPOL ST Cut 400 SF

Description:

• Honing is a finishing operation performed on the inner surface of cylinders for obtaining a smooth surface finish on them. It is carried out by grinding stones called as a "hone"
• Honing cannot be strictly termed as a grinding operation since its objective is to generate sufficiently high spot temperatures so as to smoothen the hill peaks

Salient Features:

• IPOL ST Cut 40SF is a chlorine surface, free low viscosity neat cutting oil manufactured using additives to give excellent wetting characteristics
• IPOL ST Cut 40SF meets IS 3065:1985,Type I – Grade I specification

Application:

• Designed for honing and super finishing of ferrous and non-ferrous metals
• It can also be used for grinding applications. Drilling and general machining of Aluminium and yellow metals

Benefits:

• Excellent flushing and lubrication properties
• High surface finish and dimensional accuracy
• Excellent wetting characteristics, reduced drag out
• Good filtering characteristics, high oxidation stability
• Chlorine and heavy metal free
• Environment friendly due to low mist, low odour properties

Additional Information:

• Item Code: 40-SF

Product Details:

Gun Drilling Oil 1 – For Ferrous Metals

Description:

• Gun drilling is also known as deep drilling, involves drilling of holes to a depth some times exceeding 200 to 300 times the hole
• The quality of the cutting fluid is of great importance since it not only removes the metal chips but also has to provide adequate lubrication to the tool cutting edges, as the tool travel-speed sometimes exceeds 200 mm per minute
• It is very essential for these fluids, to use the right viscosity coolant to ensure good flushing action for the dwarf and to maintain the high viscosity flow of the fluid

Salient Features:

• Formulated with specially selected mineral oils
• The additive packages are such that they impart adequate EP and Polar characteristics to the lubricant
• Low viscosity and consequent higher thermal conductivity
• Ensures better job finish and prolonged tool life

Application:

• Ideally suited for gun-drilling systems, and boring operations
• Can also work for hobbing and gear shaving operations
• Recommended specially for drilling in ferrous Metals

Benefits:

• Excellent Cooling properties
• Improved tool life
• High surface finish
• Minimum power consumption
• Higher dimensional accuracy

Product Details:

IPOL Enhanco ST Cut CF 400

Description:

• IPOL Enhanco ST Cut CF 400 is multipurpose neat oil suitable for variety of machining operations of ferrous & non-ferrous material. It can be used for the cold forging operation involving steel components
• The excellent lubrication and cooling characteristic ensures a smooth operation, protection of the work piece and extended tool and die life

Applications :

• Suitable for machining of components in automates or multi-spindle machines
• Cold forging operations for producing bolts, nuts, bushes and similar components

Key Advantages :

• Excellent lubrication
• Good EP/AW characteristics
• Chlorine free.
• Effective cooling.
• Low misting
• Good die life.
• Excellent finish
• Multi purpose product.

Storage and Packaging:

IPOL Enhanco ST Cut CF 400 can be supplied either in 210 liter non returnable Steel drums or in bulk. The product should be preferably stored indoors in dry conditions and protected from extreme temperatures. In case the drums are stored outside, adequate precaution needs to be taken to cover them for avoiding any rain water contamination

Safety and Precautions :

IPOL Enhanco ST Cut CF 400 is unlikely to present any significant health hazard when proper personal and industrial hygiene are maintained

Additional Information:

• Item Code: CF-400

Product Details:

IPOL ST CUT 1334

Description:

• The quality of the cutting fluid is of great importance since it not only removes the metal chips but also has to provide adequate lubrication to the tool cutting edges, as the tool travel-speed sometimes exceeds 200 mm per minute
• It is very essential for these fluids, to use the right viscosity coolant to ensure good flushing action for the swarf and to maintain the high viscosity flow of the fluid

Salient Features:

• IPOL ST Cut 1334 is a petroleum based neat cutting oil with low viscosity mineral oil containing a high quality fat and sulphur based additive package with anti foaming properties

Application:

• It is primarily for deep hole drilling, boring and Gear cutting operation
• IPOL ST Cut 1334 gives continuous accurate cutting with so opportunity to check results while the cutting action is on
• Not recommended on yellow metals

Benefits:

• Enhanced lubricity
• Effective EP additives for good chip formation
• Rapid Flushing action to clean swarf
• Reduced tool wear to give dimensional accuracy

Additional Information:

• Item Code: 1334

Product Details:

IPOL ST Cut 90 SF

Description:

• For Finishing operations like Honing, Reaming or Lapping or for Aluminum machining, low viscosity mineral oil based products are used as coolants
• The properties of the products used in all these operations overlap and usually a multipurpose formulation are marketed to take care of these situations

Salient Features:

• IPOL ST CUT 90 SF is specially formulated with a unique combination of refined light viscosity mineral oil with organic acid soaps and it is free from sulfur and chlorine
• It has excellent lubricity characteristics

Application:

• Can be used for both ferrous and non-ferrous metal
• Would be useful for other operations such as machining, turning , drilling and tapping of Aluminum alloys
• Can be washed using a neutral / alkaline detergent or a solvent cleaner

Benefits:

• Suitable for all metals
• Excellent flushing and lubricity properties
• Ensure good surface finish
• Can achieve extended stone life
• Environment friendly
• Achieve consolidation of inventory and overall economy

Additional Information:

• Item Code: 90-SF

Product Details:

IPOL Enhanco NC – 101

Description:

• IPOL Enhanco NC – 101 is a blend of highly refined base mineral oil with performance chemicals along with Sulphuric additive
• The product is made especially for heavy duty operations like Gear Cutting, Gear Hobbing, Thread cutting etc of the ferrous components

Benefits:

• Base oil of excellent characteristics
• Higher sulphur content ensures better weld load capability
• Higher EP characteristics ensure better tool life and surface finish
• Light color ensures better visibility at workplace
• No obnoxious odor
• No fumes in the operation

Product Details:

IPOL Enhanco ST Cut CF 1300

Description:

• IPOL Enhanco ST Cut CF 1300 is designed for the cold forging operation involving steel components. The excellent lubrication and cooling characteristic ensures a smooth operation, protection of the work piece and an extended die life

Applications:

• Cold heading operation for producing bolt nuts, bushes and similar components
• Can also be used for certain drawing and forming operation involving steel sheets

Key Advantages:

• Excellent lubrication
• Good EP/AW characteristics
• Effective cooling
• Low misting
• Good die life
• Excellent finish

Storage and Packaging:

• IPOL Enhanco ST Cut CF 1300 can be supplied either in 210 litre non
• returnable Steel drums or in bulk
• The product should be preferably stored indoors in dry conditions and protected from extreme temperatures. In case the drums are stored outside, adequate precaution needs to be taken to cover them for avoiding any rain water contamination

Safety and Precautions:

• IPOL Enhanco ST Cut CF 1300 is unlikely to present any significant health hazard when proper personal and industrial hygiene are maintained

Additional Information:

• Item Code: CF-1300

Product Details:

IPOL ENHANCO PRESSOL AS 150 Enhanco Pressol AS 150 is a low viscous oil specifically designed for lighter stamping operations on Aluminium. The combination of low viscosity and superior evaporation makes it suitable for Aluminium Fin forming operations. Applications :  Suited for light Aluminium Fin forming operations Key Advantages :  Optimised lubrication  better tool life  Excellent evaporation characteristics  minimum residue  Odourless and excellent skin compatibility  better operator acceptance  Very low level of aromatic content  environment friendly  Low pour point  stable at very low temperatures 

Product Details:

IPOL Multikut HSM 10 / 22 / 32 is Chlorine & heavy metal free neat oil, designed with advance technology extreme pressure additives based on proprietary technology.These are blended from superior quality base oils and additives which make it suitable for various kinds of operations like cutting, drilling, milling, grinding etc. The combination of optimal viscosity, lubricity and good detergency characteristics ensures a satisfactory performance on Ferrous and Non-Ferrous components.

Product Details:

IPOL ST CUT 14 H, 14P2SC, 14P4SC

Description:

• Metal removal by machining is the most common process used in the metal working industry
• Ferrous and non-ferrous metals and their alloys are machined to close tolerance by using straight cutting oils
• Non-corrosive straight cutting oils can be universally used for all types of machining operations of a less severe nature

Salient Features:

• IPOL ST CUT 14H/ 14P2SC / 14P4SC are formulated with refined neutral oils and specially selected oiliness additives to impart superior cooling ability and provide a fine finish

Application:

• IPOL ST Cut 14H is used where non-staining of surfaces is of prime importance machining all types of moderate operations
• IPOL ST Cut 14P2SC - It meets IS 3065-1985 type I, Grade II – specification. Suitable for multiple operations involving severe grinding process
• IPOL ST Cut 14P4SC is a general purpose neat cutting oil suitable for auto mats used for precision machining in anti friction bearing manufacturing industry

Benefits:

• Single product can perform over a wide range of requirements
• Superior metal wet ability characteristics improving cooling
• Do not evolve obnoxious fumes
• Helps in product consolidation

Additional Information:

• Item Code: 14H-14-P2-SC

Product Details:

IPOL ST Cut Oils 55

Description:

• This is a medium viscosity clear bright oil for machining of alloy-steels, where high temperature operations with high degree of chemical activity is required. Specially useful in severe machining conditions

Salient Features:

• Blended with refined mineral oil stocks and active sulphur, chlorine and other oiliness additives. Very effective over wide range of temperatures and with excellent surface finish
• Performance Standard : IS 3065 – 1985 (Reaffirmed 1995) Type III Gr.2

Application:

• Specifically recommended for gear hobbing and thread cutting operations
• Suitable for all machining operations on high tensile Steels and on stainless Steel and heat resistant alloys
• Not recommended on yellow metals

Benefits:

• Long tool life and least down time
• Low Fuming and no misting
• Provides excellent surface finish by controlling surface Stresses
• Help to economize on machining operations

Additional Information:

• Item Code: 55
• Delivery Time: READY STOCK

Product Details:

IPOL ST Cut 526

Description:

• Deep hole drilling of copper, magnesium, aluminum and their alloys etc., require special non-staining type of coolants
• The highly potent sulphuric products normally available as Gun Drilling or Deep Hole Drilling Oils stain the machined parts and are therefore not acceptable to the Engineering Industry

Salient Features:

• Formulated with a medium viscosity refined mineral oil, with oiliness additives with sulfur in non active form

Application:

• IPOL ST Cut 526 is normally applied to less exacting machining for both ferrous and non-ferrous stocks
• It give excellent result on ‘ Multi Spindle Automatics’ on capstan and turret lathes

Benefits:

• Provides a lubricating film of high shear strength
• Will not stain metals normally susceptible to sulfur attack

Additional Information:

• Item Code: 526

Product Details:

IPOL CUT T-60

Description:

• Ball pen Refills are a product of micro machining where the clearances through which the ink flows are in microns. Normally the operations are performed at high speeds in multi-center special purpose machines to achieve mirror finish
• The coolants for such machines have to provide adequate cooling to the tools, ability to flush job surfaces and provide lubrications to the tool-cutting surfaces. In spite of the low viscosity, the product needs to have anti-fogging properties to keep the working environment clean

Salient Features:

• IPOL CUT T-60 is a product of our R&;;D expertise to meet the needs of the industry in the competitive times. It is formulated from high quality, low viscosity and high V.I. base oils plus additives to provide effective machining performance in wide variety of operations
• The oil is light colored and transparent so that the work area can be clearly seen at all times

Application:

• Designed for light to moderate duty cutting applications and are also suitable as machine tool lubricant and hydraulic oil
• Recommended for machining aluminum, magnesium and copper alloys, along with ferrous and non ferrous metals
• Particularly suited for deep hole drilling and similar high speed operations
• For steels and cast irons having a Brine ll hardness up to 200

Benefits:

• Longer tool life resulting in to increased production and reduced down time
• Improved surface finish and good dimensional accuracy
• No staining of slide ways and machine tool fixtures
• Helps contribute to a safer and pleasant working environment

Additional Information:

• Item Code: T-60

Product Details:

IPOL Enhanco ST Cut CF 1400 HD

Description:

• IPOL Enhanco ST Cut CF 1400 HD is designed for the cold forging operation involving steel components. The excellent lubrication and cooling characteristic ensures a smooth operation, protection of the work piece and an extended die life
• The product can be used for forming operation

Applications:

• Cold heading operation for producing bolt nuts, bushes and similar components. Can also be used for certain drawing and forming operation involving steel sheets

Key Advantages:

• Excellent lubrication
• Good EP/AW characteristics
• Free from Chlorine
• Effective cooling
• Low misting
• Good die life
• Excellent finish

Storage and Packaging:

• IPOL Enhanco ST Cut CF 1400 HD can be supplied either in 210 liter non returnable Steel drums or in bulk
• The product should be preferably stored indoors in dry conditions and protected from extreme temperatures
• In case the drums are stored outside, adequate precaution needs to be taken to cover them for avoiding any rain water contamination

Additional Information:

• Item Code: CF-1400-HD

Product Details:

IPOL Enhanco Pressol Oils AS 150

• Enhanco Pressol AS 150 is a low viscous oil specifically designed for lighter stamping operations on Aluminium
• The combination of low viscosity and superior evaporation makes it suitable for Aluminium Fin forming operations

Applications:

• Suited for light Aluminium Fin forming operations

Key Advantages:

• Optimized lubrication better tool life
• Excellent evaporation characteristics minimum residue
• Odorless and excellent skin compatibility better operator acceptance
• Very low level of aromatic content environment friendly
• Low pour point stable at very low temperatures

Storage and Packaging:

• Enhanco Pressol AS 150 can be supplied either in steel drums or in bulk. The product should be preferably stored indoors in dry conditions and protected from extreme temperatures. In case the drums are stored outside, adequate precaution needs to be taken to cover them for avoiding any rain water contamination

Safety and Precautions:

• Enhanco Pressol AS 150 is unlikely to present any significant health hazard when proper personal and industrial hygiene are maintained

Additional Information:

• Item Code: AS-150

Product Details:

Description:IPOL Enhanco Solucut 101 is a multipurpose emulsifiable coolant specifically designed for the discerning users having a variety of metal removal operations on different metals, both ferrous and non-ferrous and their alloys. It may be used for alloy steels, cupric alloys, as well as aluminum alloys.IPOL Enhanco Solucut 101 is based on a blend of highly refined neutral base oils and an unique emulsifier package with corrosion inhibiting properties.Salient Features:It is formulated to offer a stable milky white emulsion even during prolonged usage. The emulsion has minimal frothing tendency and withstands higher pumping rates.Benefits: Excellent surface finish Long emulsion life. Excellent rust protection

Product Details:

IPOL Cut 90SF is a low viscosity honing & grinding oil which is free from sulphur & chlorine. This is a blend of selective base oil with exclusive suitable lubricity & EP additives to provide excellent surface finish on steel & related alloy material. Finishing operations like honing, reaming or for aluminum machining low viscosity mineral oil based products are used as coolants. The properties of the products used in all these operations overlap and usually a multipurpose formulation is marketed to take care of these situations. Salient Features:  IPOL Cut 90 SF is specially formulated with a unique combination of refined light viscosity mineral oil with organic acid soaps and it is free from sulfur and chlorine.  It has excellent lubricity characteristics. 

Product Details:

IPOL ST CUT 12,13

Description:

• Ferrous and Non-ferrous metals and their alloys are machined to close tolerances by using straight cutting oils. Non-corrosive straight cutting oils are universally used for machining all types of metals where soluble/corrosive type oils can not be used
• This is more true in case of yellow metals viz. copper, bronze etc.
• These oils are suitable for a wide range of machining operations of a less severe nature

Salient Features:

IPOL ST CUT 12 is a neat cutting oil blended with high Viscosity Index base oils and it is a low viscosity oil
IPOL ST CUT 13 also has the same blend of refined base stocks as IPOL ST Cut 12, in addition to a sulphuric oiliness additives

Application:

• IPOL ST Cut 12 is recommended for use as an economical replacement of soluble cutting oils in Ferrous and Non-ferrous metals
• IPOL ST Cut 13 finds the application in both Ferrous and Non-ferrous metals grinding and general machining, where superior cooling is required

Benefits:

• As a replacement of soluble oils
• Improved surface finish, helping to improve process efficiency
• Helps in product consolidation

Additional Information:

• Item Code: 12-13

Product Details:

Cutting Oils 103 X

Description:

• IPOL ST Cut BR Grades are active type neat cutting oils and contain medium viscosity, low pour and high flash base oils with suitable EP additives
• These oils have fatty additives, which improves oiliness property providing better surface finish. They ensure protection to the cutting tool over a wide range of operating temperature

Salient Features / Performance Standards:

• Meets IS : 3065 – 1985 (Reaffirmed 1995) Type III Grade 2

Application:

• IPOL ST Cut BR 103, BR 103X are recommended for most of the cutting operation on ferrous metal under severe operating conditions
• They are ideally suited for multi spindle automates, multi tool lathes in machining, of high tensile stainless steel as well as Ni-Cr alloys
• The use of these oils for cutting operation on Non-ferrous metal should be avoided

Benefits:

• By venture of its excellent lubricity, protects the tool edges over a wide range of temperature
• Good o oiliness property improves surface finish
• Enables machining of tough , ductile steels in severe operations
• Suitable for rationalizing the variety of neat cutting oils in use
• Better sward removal due to high detergency
• Achievers over all economy of the operations

Additional Information:

• Item Code: 103-X

Product Details:

IPOL Enhanco Supergrind 600

Description:

• Enhanco Supergrind 600 is a chlorine free low viscous oil specifically suitable for carbide and other general purpose grinding operation. The combination of low viscosity and optimum lubrication ensures a smooth grinding operation

Applications:

• Besides grinding of Ferrous and carbide tools this product can also be recommended for tapping, cutting and bar turning of Ferrous material

Benefits:

• Excellent lubrication
• Good detergency
• Environment friendly - Chlorine free technology
• Non misting

Additional Information:

• Item Code: 600

Product Details:

Description: IPOL Enhanco St Cut CF 400 series is a blend of high quality base oils & superior sulphurised inactive EP additives which enables it to work at high temperature as an effective anti-chip weld agent in metal forming operations of ferrous & non-ferrous metals. CF 400 series is specially designed for cold forging of various jobs in fastener industry, various formulations having a wide range of viscosity are marketed depending on the component size & intensity of hammer stoke. Salient features:  Superior EP properties & therefore better dies/tool life.  Comfortable working with non-ferrous metals  Does not contain chlorine therefore - more environment friendly.  Adequate base oil viscosity & higher content of polar additives provide consistently high surface finish & dimensional accuracy. Benefits: Excellent lubrication Good EP/AW characteristics Effective cooling. Excellent finish Multi-purpose product can be used on various applications. This oil useful on machines where contamination with hydraulic or lubrication oils in unavoidable.

Product Details:

IPOL Broaching Oils NO. 1

Description:

• Broaching is the severest amongst the various machining operations
• The cutting fluid used for broaching should have maximum anti-weld and extreme pressure properties in order to ensure high accuracy and finish to the job. IPOL Broaching Oil No.1 is a chlorinated, sulphuric neat cutting oil with pale/dark color

Salient Features:

• Blend of specially selected light bodied base oils and additives to withstand extreme pressures
• Offers enhanced cooling and smooth polished surfaces
• High flash point and excellent EP characteristics

Application:

• Specially suitable for broaching and gear cutting steel, stainless steels and Nickel alloys
• It is recommended for non-ferrous metals

Benefits:

• Long broach life
• Excellent heat dissipation
• Quick chips separation
• Low mist formation
• Provides optimization of product range
• Economical in terms of cost per unit

Additional Information:

• Item Code: 01

Product Details:

IPOL Hone Oil 918 is a specialized oil designed for honing operations on various materials, including steels, nickel alloys, and bearing steels. It's particularly effective in achieving fine finishes, especially in short-stroke micro-finishing operations on tough materials. IPOL Hone Oil 918 can also be used for fine machining of steel and non-ferrous metals, as well as light drawing and stamping processes.